I carry many of these tables in stock (many more than I have listed) and they are my number one seller. I really like the finished product with this table so I wanted it to have it's own posting. It has a very granite like minimalist look and I added some female RCA jacks to the rear so you can pick out your own cables (comes with a pair also).
When my customers ask me what table I recommend I always answer either the SL-D2 or the SL-3200. They are incredibly reliable, hold speed great and are built like tanks. Of course they also sound fantastic. This model was the first nice table I ever owned and I consider them to be the workhorse of the late 70's, early 80's Technics tables. The direct drive means no belts to change, and of course you get the Technics direct drive reliability. I lubed the motor bearings, replaced and refreshed any old grease with white lithium grease, cleaned the speed pots with QD contact cleaner and set all of the tonearm functions accordingly. An AT cartridge with a new stylus has been properly installed according to Technics Spec. I do move my cartridges around quite frequently so I will show you what I have available.
All of my tables have been thoroughly gone through and serviced and require little if any maintenance. The minimum that each table goes through is the following, motor bearings lubed, replace and refresh any old grease with white lithium grease, clean the speed pots with QD contact cleaner and set all of the tonearm functions accordingly. All functions will operate correctly or the turntable will not be sold! In the future if you need any help or have questions just give me a call, text or email, I'll always make myself available. Furthermore I'll never sell a table I wouldn't personally use on a daily basis. I believe in my product and stand behind my turntables!
do NOT contact me with unsolicited services or offers